FULL-SERVICE MANUFACTURER FOR UPENDER
Mechanical Upender
solution 1-60T
- Driving By Motor with Gea
- Strong Structure
- Maintainer Free
- Customization per goal
Hydraulic Upenders
Solution 1-100T
- Driving By Hydraulic pump and cylinders
- Efficiency handling
- Reliable Simple structure
- Customization
Mechanical Upender
Hydraulic Upender
3 TIPS TO SHOW WHAT IS THE UPENDER
For better understanding the upender&tilter and choosing a proper solution per load handling, follow is some tips for helping to learn some information for choosing a right equipment decision.
TIP 1: Driving Way Of The Upender
Two driving ways to providing the Upender rotating force. No one solution is better than the other Suitable is the best!
Principle:
The motor gives power to the axle, making the gear box operate and move the chain along. A converter, if used, can adjust the motor’s speed by changing the input frequency.
This equipment is widely used in various industries because it works well, is reliable, and safe.
TIP 2: Structure of the upender includes below parts
To be a tough and safety heavy loading equipment the following main part need to be reinforce with Structural Mechanics
The mechanical upender and tilter have a base that holds the drive system. This system includes a motor, gears, a chain, and rollers that support the movement. The upender is made up of two main parts: a. the turning section, b. the base. The base is where the motor and other parts are installed. Depending on the weight it needs to handle, different gears are used.
Fhope offers a turntable that comes in pieces, making it simpler to load and set up.
TIP 3. Working Table of The Upenders varies from load shape
For matching the handling goal, the working table could be designed in special form for different load size and shape.
Different materials require different types of working tables for handling. For example, coils use a fork-shaped table, steel sheets use a “C” shaped turntable, a fork-lifter uses a fork table, and a roller conveyor table connects to the conveyor for moving items. In short, the shape of the material being handled determines the design of the working table.
The “V” shape working table for for steel coils, wire coils, aluminum coils and other coil products..
The flat tables for die, mold, panel…
The fork table for paper roll, film roll…